[AlpineFX]

Aight, I was just wondering how y'all get power to your compressor? run it straight from the battery? or what about that power wire goin to the relay center, is it fusable? And another quesiton, what kinda shocks do you guys run up front?

thanks.


it'll be out this weekend :-D

:uhoh: <!-- LOL!!! looks like that dude just shit himself!! HAHAHAH

 

[SlammedDime]

Run a Fused 8 AWG wire from the battery to relay, and wire relay accordingly. I will be runnin Doetsch shocks...heard many many good things about them on bagged trucks.

 

[98layinframe]

will one 8awg wire be enough to handle 2 450's? I'm asking because I havent bought my wire yet.

 

[SlowBlue00]

I ran a 6 awg wire to my relays then from there to the compressors. No problems so far.

 

[AlpineFX]

What kinda relays y'all usin?

 

[SlowBlue00]

I have two of the 30 amp relays you find at Radio Shack. They are big enough for my Viair 450s.

 

[NAUTIQUE27]

go the s-series how to page.. it tell you how to wire up the compressors and what relay to use.. did this and no pprobs so faR!!!!!!!!!!!hope this helps

 

[LoW_1]

I wired mine with 10 AWG, is that enough, lol, I got like 20' for like $1.40 something at home depot. Dumbass me though wired a switch in there, the only problem is that I used one of those big mofo'ing 30 AMP switches when I could have run some 14 gauge to the other part of the relay and just used a normal toggle.

Get a battery terminal thing and use that because your fuse box doesnt put out enought juice, which I had to figure out myself.

 

[IRSd_mini]

I wired mine with 10 AWG, is that enough

Yep, that is fine.

 

[Guest]

I am going to run 4 guage to a distrubution block and then its 8 gauge to the relays and to the comps. Also I am going to run nissan hardbody shocks up front. Only costs 15 bucks and I got a lifetime warrenty.