im getting my york 210 compressor monday but i need to get a serpentine clutch. Where did all you pimps with the engine driven compressors get yours? 
imp:
imp:
So_Lo_Blazer
I went to autozone and they were no help. So i went to pep boyz and the guy couldnt get me a serpentine so i just bought the compressor with no clutch.
undefined
Where'd you find the York repl compressor? I need to repl mine and can't find
York xreference for my 488-22025. Do tell!
Say Boss,So_Lo_Blazer said:im getting my york 210 compressor monday but i need to get a serpentine clutch. Where did all you pimps with the engine driven compressors get yours?
Where'd you find the York repl compressor? I need to repl mine and can't find
York xreference for my 488-22025. Do tell!
Go to junk yards and get them, if you can re-build an engine you can rebuild a york. I paid 25 for mine at the junk yard. Who cares of it goes out, I only paid 25. You can get the serp clutch at onboardair.com or from an 18wheeler supply store (thats what the serp clutches were used on)
i looked up the serp clutch at autozone last may
i don't remember the part number but it was off a kenmore truck
just got to make sure its the 6rib and not the 8rib
also the price was like $99
also it was for the 210
just ask them to look at the a/c book and look up any 18 wheeler and u should be able to find the part
it took me about an hour and half to find the part in the book, because i was looking under reg cars
i don't remember the part number but it was off a kenmore truck
just got to make sure its the 6rib and not the 8rib
also the price was like $99
also it was for the 210
just ask them to look at the a/c book and look up any 18 wheeler and u should be able to find the part
it took me about an hour and half to find the part in the book, because i was looking under reg cars
For anyone wonderin, Autozone definately has the compressors. They'll run ya about $85. They're for a 81 Ford F100. As for the clutches, Autozone has them/sells them, but you gotta get the guy to find one for ya, cause most are v-belt. I dont know what itd be listed under in their computers.
no steve you dont cause i found it on ebay with the compressor and it costs just as much as one york from a parts store without one.94badazz said:CLICK ME!
mark... must i do all the work for u? j/k man, looking for one anyway. cheapest i can find... but hey, its new! its the price to pay to be pimp!
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
