S-10 Forum banner
41 - 60 of 229 Posts
Thanks for the info.
 
crazy c= i think your talking about the two wheel drive wheel, it will go on but it will stick way out, of course if your into the mexican scene that could be a good thing.
 
im lookn for something to stick out but not to far maby 1 or 2 inches but i dont want trouble turning it rubbing or anything as long as flares will cover it that would be cool a lil t-bar and a brush guard i think it would be pimp...lol
 
After making all the required steps for lifting like ring & pinion and getting the lift kit on there why would you want to run tires that are so big your mods are useless. I've found its best to have some room for travel but thats my experience in rugged terrain. I'll be running 33 12.50 15s but on lightweight wheels and reduced weight in the engine so I dont feel any problems will occur.
 
Switch said:
1996 Chevy Blazer S-10 4x4

What is the biggest tire and rim I can fit on the stock suspsension without it rubbing.

What would you reccomend? Links?
Thanks
Can anyone help here?

I want to keep the stock suspension (No lifts) but I want some bigger tires and nicer rims.

I wanted some nice black rims, but I dont know what size, or good manufacturers..
I also don't know what the biggest tire I could put on without it rubbing the wheel well.
 
I am new to the 4 wheel scene and got a BlaZeR2. I am going with Daystars, T-bar crank, and a PA body lift. I hear I can run 32's and maybe 33's with trimming. I wanted to know what would be best for sand. I live relatively close to Silverlake sand dunes in michigan. Any suggestions for tread pattern and such? I was looking at either mud terrains or MT/r 's. Thanks.
 
Re: This thread is for all you 4x4 related Wheel and Tire Questions!!!

stumpy_the_avnger said:
I'm getting a 3 inch body lift, could I run 32's or are 31's the biggest I can run without trimming
Where did you find a 3" body lift? I was look for one for mine and couldnt find one. Late...
 
Re: This thread is for all you 4x4 related Wheel and Tire Questions!!!

2003 Stock height 4x4 exten cab...stock cast wheels(15x7) :D , will 31x10.5x15 tires fit ? Also considering 275x60x15.....

Thanks for your help !
 
Re: This thread is for all you 4x4 related Wheel and Tire Questions!!!

A stock height 2nd gen = 30x9.50s
a 2nd gen with a 2-3" BL=31x10.5s, maybe 32s with the 3" and alot of trimming
a stock ZR2=31x10.5s (stock size, anything bigger WILL rub)
a ZR2 with a 2-3" BL=32x11.5s, maybe 33s with the 3" and alot of trimming
These examples are all using stock rims...anything with less than 5" or so of BS will make the rubbing worse.
The problem with S-10s is the small wheelwell openings...you have to lift them high enough so the body clears the tires, if the tires are in the wheelwells like a normal truck, they hit. I still rub a little off road with my setup....rubbing is a way of life with an S-10 unless you want to get ballsy with the sawzall.
 
Re: This thread is for all you 4x4 related Wheel and Tire Questions!!!

I have a 1987 GMC Jimmy (S-15) 4x4 and i was wondering what is the biggest tire I could fit with a 3" body lift. Thanks
 
Re: This thread is for all you 4x4 related Wheel and Tire Questions!!!

Will cranking the t-bar give me a half-inch or so on a 95 2wd s-10 safely? Im rubbing wheel well slightly when wheel is fully turned with stock set-up with 235-75-15's.

ANYONE?
 
Re: This thread is for all you 4x4 related Wheel and Tire Questions!!!

On a 2wd you don't have torsion bars...Where are you rubbing the wheel?!?! That can't be good
 
41 - 60 of 229 Posts