i usually use paint and just resize. I have a 3.2 mp and go down to 30%.

 

i wanna see
post some pics

 

here are some pics

 

looks good. Need some side shots.

 

The back bags and the bed are going back on tommorrow. Then hopefully I can get the front back together, and Sunday will be plumbing and wiring.Here is the start of the bed cut out. I have to take another 3/4 in off each side.

 

This is how it looked when I bought it for 800. It ran like Sh!t and needed rims and tires. I got most of the body work finished and Primed it. I still need to finish the caddy lights and the rain drains on the roof.

 

lookin good

 

I am hoping to have it bagged by monday, but I still need to rewire the door poppers and part of the alarm.. I would like to be dragging by next Saturday.

Oh ya I wouldnt be able to do any of this without Jason at Suicidedoors.com

 

good progress. I would sugest wiring and plumming most of the stuff you can without the bed on. it makes it 100 times easier.

 

This is what I got done today. I would have gotten more finished but we started to get thunderstorms. I got the bags in the back, the bed back on, the front plumbed and the wires for the valves from the bed to the cab. Then I started putting the spindles on and I started to get wet. I hope to have my wheels on and the truck on the frame tommorrow but I dont know yet.

Here are some pics.

The hose on my back bag was a test hose to see how much lift I got with the mono leaf setup. I cant wait to get my SD three link.

 

lookin good...wheres the tank and stuff gonna be mounted?

 

lookin good...wheres the tank and stuff gonna be mounted?

I am going to mount the tank in the bed by the back window and the compressor on the side wall of the bed. Then I have a circuit breaker and distro boxes for the power and the grounds. I think I can get it done by Monday.

 

Does anyone know where I can get a single needle apc speed glow gauge. I want one for my tank pressure.

 

lookin good man

 

that thing is gonna ride like shit with those flipped monoleaves

otherwise it all looks pretty good, same bridge kit as mine and I like it alright, but I'm gettin tired of bags over the axle, wanting to go to bags on the bars now cause my lil bro's rides so damn good

 

looks like the same welder i use. lincoln 135? i love thaat thing.. gas makes it soo easy to lay a nice clean bead.

 

Good luck with it bro! Coming along great. Keep the pic's coming.

 

lookin good man.

 

that thing is gonna ride like shit with those flipped monoleaves

otherwise it all looks pretty good, same bridge kit as mine and I like it alright, but I'm gettin tired of bags over the axle, wanting to go to bags on the bars now cause my lil bro's rides so damn good

I am waiting to get my 3 link from Jason it should be in in 2 weeks but I am having surgery on my wrist so I will be out for 2 months and I wanted to get it bagged. I will post some more pics in a few minutes

 

what size block you running with a flipped mono?

 

Here is what I got accomplished Sunday and Monday. The front airlines are kinked somewhere so the front is extremely SLOW. I am gonna get another compressor and redo the fron airlines this weekend.

 

what size block you running with a flipped mono?

4 inch. but it rides like sh!t so I cant wait for my 3 link and my nitro shocks

 

Any pics aired up? Also what size rims are those? Looks good though..

 

Any pics aired up? Also what size rims are those? Looks good though..

I will take some pics of it aired up tommorrow, I only get like 4 inches of lift in the back so hopefully when the SD 3 link gets here I will get more. Oh ya 17 in rims 255/45/17 tires.

 

Looks good, yea, you will get more lift with out a flipped mono. If I was you I would flip it back, you won't lay as low, but will make a big difference in ride and lift.