I'm not positive about layin ground effects, use a smalelr notch but i dont know about the front. I personally wouldnt wanna lay ground effects though cuz I'd be afriad of smashing them. The system wills upport the bike, and bags ride better than cylinders.

 

I dont mean support the truck on the kit but to where when I park I dont have to worry about letting too much air out and then there go my effects

 

i've got my X bagged. i've got 2500# bags up front with 2" drop spindles and my tires hit the inner fender before the gfx hit the ground. the air dam is barely off the ground but it won't hit the ground. the rear is bagged with an alter images 4link with the cantilever bars. i didn't even notch my frame and i'm almst as low in the rear as the front but not quite. the bed isn't cut and the tank and compressor is under the bed. i've got pics showin how low the front is but i haven't took pics since the back was done. you can go here http://s10.nac.net/gallery/view_album.php?set_albumName=albun28 and check out my pics