S-10 Forum banner
1 - 10 of 10 Posts

cstiles

· Registered
Joined
·
251 Posts
Discussion starter · #1 ·
i searched and did not find what i was looking for.i got a 88 4.3 s10 pick up which is which and what do they do.my gauge is not working and one person swears its the sensor and the other says its the switch.i know one is supposed to be for the computer and the other for gauge or maybe im wrong.somebody give me some info on what the two do where i dont buy the wrong part
 
The sensor for the gauge is at the passenger side in top of the exhaust manifold.
A single green wire goes there.
Take off the wire and connect it to ground (ign. on). The gauge must move to max temp.
If it does the sensor is bad.
If not it could be the gauge, the wire or a bad ground somewhere by the cluster...
 
one other detail they are different sizes on my truck
 
dont you mean its in the cylinder head?
Yes thats what i try to say, my english isn´t the best, but i want to help here too, because many of the users here in this forum helped me in the past, too:)
So thats the only thing i could give back:D
 
1 - 10 of 10 Posts