S-10 Forum banner
Cancel
Create thread New Garage Forums

Im Baggin :)

Jump to Latest
1 - 18 of 18 Posts

jayska

· REMEBER THE OLDSCHOOL
Joined
·
627 Posts
Discussion starter · #1 · (Edited)
Hey Kats


I have decieded and ask my wallet if i should get Bags and she said yes ;)

Now i have my Cousins shop where he will install and cut for me, I am sitting on 20's so i am not sure if will require new controll arms.

but any input will be great. I am not sure what i getting into but im sure it will be great.


here are my Specs out. This wont be installed March but its a summer anyways :)But where is a good place to pic these up. i am going to start buying this shit.

1. 200psi Air Zeinth
2. SMC 1/2 Fill valves with 3/8 Dump
3.5 Gallon 8 port tank
4.Airlift 180 Dual port front and back
5.Air Ride Technologies 4 link kit

Any suggestions from my brothers and sisters would be key CHeers!!!

Peace
 
#2 ·
jayska said:
Hey Kats


I have decieded and ask my wallet if i should get Bags and she said yes ;)

Now i have my Cousins shop where he will install and cut for me, I am sitting on 20's so i am not sure if will require new controll arms.

but any input will be great. I am not sure what i getting into but im sure it will be great.


here are my Specs out. This wont be installed March but its a summer anyways :)But where is a good place to pic these up. i am going to start buying this shit.

1. 200psi Air Zeinth
2. SMC 1/2 Fill valves with 3/8 Dump
3.5 Gallon 8 port tank
4.Airlift 180 Dual port front and back
5.Air Ride Technologies 4 link kit

Any suggestions from my brothers and sisters would be key CHeers!!!

Peace
Click to expand...
Damn it no! your not dumping yours before I do!!!! how much does this all cost Jay? i'm looking into getting this done over the winter as well

I just bought my buddies Xenon kit for the front of my truck (sweet!!) and looking at picking up some 100 Spoke Dayton's my buddy is selling off his ford ranger, so bagging my truck is my definite next step for the winter time. Please someone fill me in on what i'll need!

Congrats Jay
 
Save
Reply Quote Like Like
Discussion starter · #4 ·
XTension said:
Damn it no! your not dumping yours before I do!!!! how much does this all cost Jay? i'm looking into getting this done over the winter as well

I just bought my buddies Xenon kit for the front of my truck (sweet!!) and looking at picking up some 100 Spoke Dayton's my buddy is selling off his ford ranger, so bagging my truck is my definite next step for the winter time. Please someone fill me in on what i'll need!

Congrats Jay
Click to expand...
Np Brother ill pass u quote as soon as get one made out.. but i am sure its never ending money pit. i think the job was going to be 3500 to 4000.. but all the relocating and small details were not factored in.

I hate to ask and sound like retard, but what is Tubing the firewall? in my defence i know where the firewall is :)

BTW BlueSonma that was amazing thred i have seen u crusin in Burlington brother. I love those Spring...

I hope to be starting in Feb March with my fat xmas Bonus :D
 
#7 ·
i would change acouple things, get a 8 gal cause 5gal is not much air. i got a az and 8 gal and it fills fine. also go with slam 7's up front you will thank me later, the 8 gal will fit under the bed in the place that the spare tire is so you can keep your bed clean. let me no if you need help on anything or some pics. also i wouldnt pay for corntrol arms you can just mod your stock ones for free
 
Discussion starter · #10 · (Edited)
benn said:
i would change acouple things, get a 8 gal cause 5gal is not much air. i got a az and 8 gal and it fills fine. also go with slam 7's up front you will thank me later, the 8 gal will fit under the bed in the place that the spare tire is so you can keep your bed clean. let me no if you need help on anything or some pics. also i wouldnt pay for corntrol arms you can just mod your stock ones for free
Click to expand...
Yeah Brother i was thinking of going with 8 Gallon with 8 ports and maby going dual with the bags... Slam 7's hey ok f it ill grab those ;) quick response time sounds good to me with all the this Engine Modding that dream might fad :)

I have been Doing some serious Reading on those CA's yeah they seem pretty easy to mody with right knowhow. But i think i going to grab aftermarket wont the Negative Camber on modded CA kill The Arm and wear out the balljoints in no time.

I am ready to cut those Finders today!!! i rub with wide turns without major mods. i have stock 2" drop. I miss doing U turns :) CALL ME THE 3 POINT TURN KING!!!!

Peace
 
#12 ·
jayska said:
hey kats a preview
Click to expand...
sweet dude, I've got from this friday (the 25th) to the 4th of september off, anybody want to have a small meet at a timmie's somewhere?

Or Jay we could just meet up and burn a fathead, it's all up to you

This is the only time I can take off from now till December so I want to party like it's 2999
 
Save
Reply Quote Like Like
#13 ·
XTension said:
sweet dude, I've got from this friday (the 25th) to the 4th of september off, anybody want to have a small meet at a timmie's somewhere?

Or Jay we could just meet up and burn a fathead, it's all up to you

This is the only time I can take off from now till December so I want to party like it's 2999
Click to expand...
P.S.

Jeff, I know your going to Sauble on long weekend,

but is anyone else going? it would be awesome to have a mini meet up there also, perhaps we can meet up eh jeff? i'd like to talk a bit more about Low Class!
 
Save
Reply Quote Like Like
#15 ·
jayska said:
Got another Wedding this weekend :( cant go DAMN I MISS THE BEACH

But the 4th is good for me... :) LETS ROLL Sign me up for that one!!
Click to expand...
the fourth is the monday right?

I dunno about that i'll be coming back from camping that day, truck all dirty and me all partied out then work the next day, that'll be rough
 
Save
Reply Quote Like Like
#17 ·
jayska said:
Hey Kats


I have decieded and ask my wallet if i should get Bags and she said yes ;)

Now i have my Cousins shop where he will install and cut for me, I am sitting on 20's so i am not sure if will require new controll arms.

but any input will be great. I am not sure what i getting into but im sure it will be great.


here are my Specs out. This wont be installed March but its a summer anyways :)But where is a good place to pic these up. i am going to start buying this shit.

1. 200psi Air Zeinth
2. SMC 1/2 Fill valves with 3/8 Dump
3.5 Gallon 8 port tank
4.Airlift 180 Dual port front and back
5.Air Ride Technologies 4 link kit

Any suggestions from my brothers and sisters would be key CHeers!!!

Peace
Click to expand...
bro you really need to re read the avatar rules...unless thats your mom...dad...sister or your cousin suckin on a dildo ...its got to go...


Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
 
#18 ·
werd, and to the guy a few posts up

modified stock arms will NOT wear out balljoints or cause camber issues. the camber on s10's is adjustable, and modifying the stock upper control arm is what we do to CORRECT the balljoint binding

you will not have any problems with modified stock arms and stock balljoints
 
1 - 18 of 18 Posts
About this Discussion
17 Replies
8 Participants
Last post:
sadexcuse4s10
S-10 Forum
posts
8.9M
members
200K
Since
2001
S10forum is the community to discuss the S-Series, Chevrolet Colorado and GMC Canyon. Join to discuss rebuilds, modifications, tech articles and more!
Full Forum Listing
Explore Our Forums
Baggin' It 262ci Forum (4.3) Member Projects Member Rides 2.2L - 2nd gen 4-banging