Help on Pistons!!!

nelsonjr · Nov 29, 2005

Ok...i have a 383 stroker with 5.7 rods. in order to get 10:1 compression with my setup I need 20 cc DISH forged pistons, and i dunno if im not looking hard enough but i cant find um ne where?

if ne 1 can point me in the right direction that would be much appreciated!
Thanks

AAPPS · Nov 29, 2005

Any company....

You'll have to get them special made, probably....

I always liked the Ross pistons.

ASEMstrCertified · Nov 29, 2005

I would try the Keith Black Hypereurtic if you cannot find the forged pistons. They should definately have those available!

Formulakid1 · Nov 30, 2005

Try http://www.diamondracing.net/

nelsonjr · Dec 1, 2005

Thanks Guys!

JROD Jr. · Dec 1, 2005

ASEMstrCertified said:
I would try the Keith Black Hypereurtic if you cannot find the forged pistons. They should definately have those available!

wasnt there a thread discussing that Keith Black Hypereurtic are brittle and when they break they explode?

NewV8S10 · Dec 1, 2005

JE/SRP has an off the shelf set that have 16cc dishes.

Probe makes a off the shelf SRS piston that is 20.4cc.

What heads are you using? With standard gaskets and a 58cc head, 20cc dished pistons should be good for 9.5:1 compression.

nelsonjr · Dec 2, 2005

Im goning to be using the stock aluminum heads, 56.5cc chamber, i just figured out the instead of 20cc dish i need an 18cc dish... ill lookin to srp.

Help on Pistons!!!

nelsonjr

AAPPS

ASEMstrCertified

Formulakid1

nelsonjr

JROD Jr.

NewV8S10

nelsonjr

Top Contributors this Month

Recommended Communities