hey guys i was wondering if you guys can post pics of your frame notched for your tie rods and the reinforcing of them and what not 18's and 20's i appreciate it
tie rod pics
LayinSdime
1 - 20 of 34 Posts
Joined
·
326 Posts
hey guys i was wondering if you guys can post pics of your frame notched for your tie rods and the reinforcing of them and what not 18's and 20's i appreciate it
Joined
·
326 Posts
does anyone have any pics of it? just as a visual
Joined
·
13,509 Posts
I dunno what size tires those are, but I will have to notch my frame for the tierods with running a 245/40/18Basic said:
Joined
·
12,277 Posts
does it matter how thick the pipe is u use that u weld in?
Joined
·
107 Posts
would i have to notch my frame for tierods with 245/45/17 tires and drop spindles?
Joined
·
1,038 Posts
If you want it to lay out you do.chevySdime93 said:
Joined
·
1,481 Posts
here's mine. its a fullsize but you get the idea
![Image]()
Joined
·
1,327 Posts
i had to notcxh mine a bit on 215/45/r17...
Joined
·
3,444 Posts
is it nessecary to weld in some sort of filler plate after notching it?
Joined
·
4,977 Posts
i would....thats a hefty notch in the frame right where it takes a lot of stress from the front end going up and down and also from teh weight of the engine, without welding in a notch ill wanna bow into itself and fold inward....thats also why a pipe is such a good choice, half circles disperse weight better and have higher load limits....i think? LOL
Joined
·
5,295 Posts
I have the Cool Ride ART Kit with Tubular Uppers and Lowers with 2inch drop spindles. I have a 18" wheels with 40 series rubber. (Not Installed Yet)
Can you guys tell me if I will have to notch the frame up front and also what will (in your opinion) need to be done to lay the front frame out on a regular cab 2000 S10?
I'm new to air ride so I could use some info. thanks
Can you guys tell me if I will have to notch the frame up front and also what will (in your opinion) need to be done to lay the front frame out on a regular cab 2000 S10?
I'm new to air ride so I could use some info. thanks
Joined
·
8,181 Posts
NickZigaitis- your gonna need to notch up front for the tie rods. To lay your gonna have you mod your LCA's. There are humps on each side, you need to cut those out and plate underneath them. Your prolly gonna need to cut your cuts down a lil bit. then after all that your prolly gonna have to take out your inner fenders and relocate a bunch of stuff. you can weld or bolt in new fenders or run without them, your choice...
search around, theres some threads on relocating and making it lay out...
heres one that i looked at..
http://www.s10forum.com/forum/showthread.php?t=138321&highlight=Air+Bag+Wiring
hope that helps ya man, if ya need anything else PM me
search around, theres some threads on relocating and making it lay out...
heres one that i looked at..
http://www.s10forum.com/forum/showthread.php?t=138321&highlight=Air+Bag+Wiring
hope that helps ya man, if ya need anything else PM me
1 - 20 of 34 Posts
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
