Ok i have an 83 S-10 with a 350 i did a 5 in bodydrop so i am about 1/2 inch from the door. I had to move the motor back 3 inches and down 2 so i could clear a stock hood but now i cant find any manifolds to fit does anyone know of any that are real snug to the motor and drop out the back. thanks
5 in drop, 350, stock hood HELP
2 reading
sofa king
1 - 6 of 6 Posts
Ok i have an 83 S-10 with a 350 i did a 5 in bodydrop so i am about 1/2 inch from the door. I had to move the motor back 3 inches and down 2 so i could clear a stock hood but now i cant find any manifolds to fit does anyone know of any that are real snug to the motor and drop out the back. thanks
you could make yourown or modify a set, and just have each runner come straight out to a main collector like the one in the pic but straight out from the port not down till after the frame is cleared,
with most everything off you should have the room to fab it up,
with most everything off you should have the room to fab it up,
Joined
·
1,688 Posts
:stupid: I'd say try to fab some up yourself...
BTW... I was really interested in more pics of your truck... my 85' is going through the same process now... cab is about 90% finished on the bd. next is the bed, and hopefully after january a 350 setup.
thanks in advance!
BTW... I was really interested in more pics of your truck... my 85' is going through the same process now... cab is about 90% finished on the bd. next is the bed, and hopefully after january a 350 setup.
thanks in advance!
1 - 6 of 6 Posts
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
