S-10 Forum banner
1 - 6 of 6 Posts

·
91 2.8! rat rod to be?
Joined
·
224 Posts
Discussion Starter · #1 ·
hey guys, I know part of this might be a repost, but I did read through first and all...

My hazard lights work they are intermittent, (sometimes going really fast sometimes hardly flashing) and my signals just died. I have no signals at all... I changed the flasher cuz that is a $2 part, any idea on what would cause this?

Thanks for all the help!!

Mark
 

·
91 2.8! rat rod to be?
Joined
·
224 Posts
Discussion Starter · #3 ·
i changed the blinker flasher about 3 weeks ago, tried a different one last night as well,
 

·
Texan by Marriage
Joined
·
127 Posts
go ahead and replace all the light bulbs? don't know how much it would cost to replace them all, but it would eliminate those as a problem.
 

·
91 2.8! rat rod to be?
Joined
·
224 Posts
Discussion Starter · #5 ·
my hazards still work, so it isn't the bulbs, and I changed the flasher fuse and that didn't work... any other ideas?
 

·
91 2.8! rat rod to be?
Joined
·
224 Posts
Discussion Starter · #6 ·
hey guys, i replaced my flasher fuse, apparently I had a bad one, but about 10 mins after I replaced it, it blew again (the 15amp one) and then again... any ideas?
 
1 - 6 of 6 Posts
Top