[NEs10blazer]

Will I be able to fit 33's on my 94 s10 blazer that has a 3" PA Bl, t bar crank, and shackles? or would i have to stick with 32's?

 

[TheDingo]

depends on backspacing and if you are gonna be wheelin

 

[crazy91s10]

id say 32s just to be safe and keep the rubbin to a minimum

 

[NEs10blazer]

its a definate yes on wheeling, no rocks here in nebraska, so mainly mud and smaller hill climbs and what nots. Id run whatever backspace would give me 33's, i really dont have a preference to bs as i havent even bought the wheels yet. Im leaning towards these cragars http://www.jegs.com/webapp/wcs/stor...goryId=20989&parentCategoryId=11259&langId=-1

 

[TheDingo]

yay CHEAP haha, save your money and run what you have unless you are really that worried, worst case get spacers off ebay

i would have to say 32"s cuz you need that room, have to be careful

 

[tfpets]

I have the same setup you are talking about on mine (also 94) with 32x11.50s and with trimmed fenders. I really dont think I could get 33's without rubbing even with the fenders cut. maybe 33x10.5s??

 

[unclemikesdog]

I use 32" tires on my '91 with 4-5" lift and still get plenty of rubbing when rockcrawling, not to mention the drastic change in gear ratio.

 

[NEs10blazer]

whats going to be the best bs for 32 11.50s, of course they are cheap....i like look of the black steel wheels and why not get the best deal on them?