S-10 Forum banner
1 - 20 of 24 Posts

·
Registered
Joined
·
2,850 Posts
Discussion Starter · #1 ·
They Finally Came Out. Clear Corners For S10/blazers With Fog Lamps Pic Inside<<<<__

well they finally came out last week. i got them today and have to take mine off still. most likly the place where there is no light i have to use the stock fog lamp part for the clears. we will see how it goes. they are also diamond eye
tony
 

Attachments

·
Registered
Joined
·
2,850 Posts
Discussion Starter · #4 ·
got them from streetbeatcustoms.

they had hairline cracks in them and they are sendign out another set. they said all of them have it.

when i called apc they said they should not have that on them

so ill see how this second set it. if its messed up gonna call stylin concepts see how much they charge

tony
 

·
1999 Xtreme LS1
Joined
·
15 Posts
Tony:

Are you satified with how the fog lights and the clear corners line up? It seems in some pics they don't match up too well (color and alignment).

I am currently rebuilding a '98 S10 SS. I want to go with clears.
I have to choose between buying factory fogs (~$100) and clear corners vs. install standard clear corners w/o factory fogs and use factory fog wiring for after market fogs down in the air deflector...

You can see what I started with at:
http://personalpages.tds.net/~jeberhardt/J&JToys.html
It will eventually get LT1 w/ SC installed by LHT (www.leeshightechtrucks.com) - then it will go to the track...
 

·
Farm Member
Joined
·
18 Posts
SOrry to say TOny but i have had those on my truck for about 4 months now..!!!!

they are not the euro ones though but still......

later
 

·
1999 Xtreme LS1
Joined
·
15 Posts
98 SS ON NOS said:
good luck they will charge you 15000 for that set up
If I do it it wiil cost nearly that much and will not have as much HP and no guarantee/warranty...
 

·
1999 Xtreme LS1
Joined
·
15 Posts
Why does this guy's fogs/clears look so bad?
 

Attachments

1 - 20 of 24 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top