my monte is a street strip car right now, but soon it will be a trailer queen. the body was given to me twice. the second time i thought i should do something with it.
it has a 350 punched .030 over, .125 dome pistons, ported and pollished sprtsman 2 heads, fully balanced bottom end, comp cams etreme energy 274H cam, angus roller rockers, edelbrock performer rpm manifold, holley 700 dbl pumper, msd 6a ignition..
the tranny is a th-350. tci pro super kit, tci 36 element sprag and drum, trans go valve body programer kit, and a tci super street fighter converter, and that goes into a gm 7.5 inch rearend, 3:73 richmond gears and an auburn diff.
after all the drive line is donei will go on to the body.. the car ran a best time of 12.9 @ 102.5 mph. that time was run when the motor had some problems. the plugs were oil fouled and my old converter wasn't stalling....

it has a 350 punched .030 over, .125 dome pistons, ported and pollished sprtsman 2 heads, fully balanced bottom end, comp cams etreme energy 274H cam, angus roller rockers, edelbrock performer rpm manifold, holley 700 dbl pumper, msd 6a ignition..
the tranny is a th-350. tci pro super kit, tci 36 element sprag and drum, trans go valve body programer kit, and a tci super street fighter converter, and that goes into a gm 7.5 inch rearend, 3:73 richmond gears and an auburn diff.
after all the drive line is donei will go on to the body.. the car ran a best time of 12.9 @ 102.5 mph. that time was run when the motor had some problems. the plugs were oil fouled and my old converter wasn't stalling....