S-10 Forum banner
1 - 4 of 4 Posts

·
spark it or park it
Joined
·
165 Posts
Discussion Starter · #1 ·
I'am sure this topic has been asked but what would be a good choice to replace my factory plugs and wires....Just tryin to free up some hampsters to get more power if you all know what I mean...
 

·
slowly fast
Joined
·
2,001 Posts
MSD,Taylor,Vitek,Accel and Magnacore all make wire sets.Stock sets usually have resistance between 6k-8k ohms,the MSD and M agnacore are around 1k-2k ohms which means more juice gets to the wires.I'm not sure what the resistance is on the other brands.Accel,MSD,and Jacob's make coil pack replacements.
 

·
slowly fast
Joined
·
2,001 Posts
Oh,if you want more power stay away from platinium plugs.Platinium is good because its harder than copper and is more resiliant so the gaps on the plugs stay within tolerances longer.Thats why all the factories are putting them in so you can go 70,000 miles with out having to change them,but platinium is a poor conductor(much higher resistance than copper)
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top