S-10 Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
I have a 03 s-10 with a 4.3 standard it needs connecting rod bearings can I do this work with engine still in truck
 

·
Been there Done it
Joined
·
8,167 Posts
If it's 2wd you can't get the pan off with the engine in the truck. Besides if the bearings are bad there's a real good chance the crank needs to be turned down.
 
1 - 3 of 3 Posts
Top