S-10 Forum banner
1 - 4 of 4 Posts
Joined
·
190 Posts
Discussion Starter · #1 ·
So last year, I was on a set of 30th aniv. 16" camaro wheels, and that was pretty cool, but I want bigger. So I started looking around at 20's, and found the rim I want (Structure S40) But I'm not sure what width I can go with. the s40's come in, as far as I can find, a minimum width of 9". Too wide?
I've got a 2000 4x4 Blazer. During the summer, it's dropped 3/3 via T-bar and blocks. Nothing to much lower is gonna be happening anytime soon.

Any ideas on whether I can fit a 20x9" rim under there? or does it have to be 8 wide?

Thanks much...
 

·
choppin on twankies!
Joined
·
656 Posts
out back would be fine but in front would be cuttin it close..the biggest i would run up front is 8.5 with a 4.75"bs..
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top