[devilshewrote]

on the passenger side im running the airline but didnt cut a hole in the frame where the notch is so i cant run any wire/airline threw the inside of the notch. so i was wondering if i ran the airline along the side of the notch would it be a problem if i got some type of connectors that drill into the notch that will hold up the airline?

 

[94badazz]

sounds good as long as its not in the way of anything... just make some brackets up just cut sheet metal into strips and wrap drill bolt to frame... sounds good to me!

 

[slamd98s]

:thumbup: Im going to be running zip ties with a bracket that holds them just drill a small hole and push em in the zip them up in there....

 

[Dejablue2001S10]

zip ties, a mini truckers best friend!

 

[anotherblacks10]

I used these little clamps I bought at Home Depot that are used to hold 1/2" electrical pipe to walls. I just put the line through it and it has a small hole on top to put a screw through it, so i put them on the frame with self tapping screws. They are just the perfect size for 1/2" line and they also carry it in 3/8" and other sizes. Look for them in the electrical section, they're like 0.99 for a pack of 4.

 

[94badazz]

now thats what im talkin about! thats what im using....

anotherblacks10... are you gettin the ones with rubber on the inside ring? or are they just plain metal... i got ones with rubber from work... worried it might rub through the line!