S-10 Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
393 Posts
Discussion Starter #1
Hey guys

I just wondering if the 16X8 Iroc Z-28 rims work ok on a 86 S-10?
These rims are off a 89, and my truck hasn't been lowered, (yet, Im considering a 3/4 drop or a 2/3 drop.)

Is the back spacing ok?

etc?

Thanks!
 

·
Registered
Joined
·
58 Posts
Yes, but beware as the fronts and rears on these have a slightly different backspace. Put em on the right corner and all is good.
 

·
Registered
Joined
·
393 Posts
Discussion Starter #3
so I'd just want to make sure that the "back set rims" are on the back, and the front are on the front?
 

·
Registered
Joined
·
58 Posts
Yep! As I recall, the rears are slightly deeper. You could just match em up, then try em on and see if they clear.
 

·
Long Bed Member
Joined
·
3,065 Posts
the 3rd gen f body rims have LESS backspacing in the front this was done to clear the struts and other stuff . but yea like top jimmy said they have 2 different offsets i have no clue which will work better so you have to try em
 
1 - 5 of 5 Posts
Top