S-10 Forum banner
1 - 8 of 8 Posts

·
Need to get bagged!
Joined
·
242 Posts
Discussion Starter · #1 ·
How does the panel under the rear windsheild come off. Im tryin to start sandin all my interior. Thanks.
 

·
Super Moderator
Joined
·
51,327 Posts
pull it out on the bottom, its clipped in, once the bottom is unclipped, just lift straight up, your b-pillars will need to be out more than likely too for you to get it out completely...
 

·
Computer Geek
Joined
·
6,326 Posts
the b pillars do need to definately come out to get that rear piece out. its fairly easy once u unscrew everything
 

·
sold the dime :(
Joined
·
4,586 Posts
yea, u dont have to remove the pillars.. atleast on my reg. cab i didnt, just start from one side push in a little on the pillar for clearence and yank the back piece. start from bottom. after all bottom is loose it has a lip up top so just raise it up! 2min. tops
 

·
Registered Pwnz0r
Joined
·
84 Posts
So do you or don't you have to take the b pillars out for an extended cab?
 

·
sold the dime :(
Joined
·
4,586 Posts
just try it! push the pillars to the side to clear thegap and jerk the bottom of the back piece. trust me it will work.
 
1 - 8 of 8 Posts
Top