S-10 Forum banner

1 - 6 of 6 Posts

·
Gaaoooooo
Joined
·
13,572 Posts
Discussion Starter #1
I have a zq8 with stock ride height in the front and 1 inch lower in the back, I want wider tires in the back but I also do not want my 255's to go to waste since they are basically brand new. Will the 255 rub too much in the front, if so is there something that I can trim to prevent it? I am assuming that it will only rub at full lock, so I might just deal with it anyways if thats the case.
 

·
Registered
Joined
·
222 Posts
i think they might rub a little. ive got zq8 v6 with 2" spindles and the 235/55/16s rub on everything. i wouldnt try the 255/50s i got out back, on front. but then again you are 2 inches higher than me.
 

·
up to sumthing
Joined
·
575 Posts
at stock zq8 height they shouldnt rub at all,

I ran then with a 2/3 & they only rubbed a lil bit at full lock
 

·
Gaaoooooo
Joined
·
13,572 Posts
Discussion Starter #4
samdogmx said:
at stock zq8 height they shouldnt rub at all,

I ran then with a 2/3 & they only rubbed a lil bit at full lock
Great, thanks a lot.
 
1 - 6 of 6 Posts
Top