[Lumberjack]

You need a rail pressure of 58-62 psi There is an adapter fitting made by Russel Part#640850 that will adapt the GM rail to #6AN fitting. For guys wishing to adapt #6AN to their existing 5/16" return line use part
JUST TO LET YOU ALL KNOW THAT RUSSEL HAS A NEW PART # FOR THESE FITTINGS AND I THINK THAT THEY ARE WAY BETTER THAN THESE BECAUSE OF NOT HAVING TO DEAL WITH THE PLASTIC CLIP PART http://www.edelbrock.com/new_products/russell.shtml LINK TO FITTINGS FROM RUSSEL

 

[Noob17268]

I have the complete harness and ECU from the truck my motor came out of .Can i use the harness that came with the LS motor and just get the ecu relashed instead of getting a new harness ?

 

[04Xtreme]

I have the complete harness and ECU from the truck my motor came out of .Can i use the harness that came with the LS motor and just get the ecu relashed instead of getting a new harness ?

yes, some rework will be required to the harness, but yes

 

[Noob17268]

yes, some rework will be required to the harness, but yes

Thanks , rework as in what? It seems as though it should be a plug and play , sorry for the dumb question im still researching on the swap . Maybe i should have done more reading before i bought the 5.3 :rotf: eh it was a good deal

 

[OrangyX]

You need to repin the harness....

Read this thread.....http://www.s10forum.com/forum/f213/budget-blazer-477762/

 

[Bouche]

hey guys... i can pick up a complete ls2 minus tranny for 600 bucks. roughly how much in parts am i looking at to get it going in my 87 s10 blazer 2wd

 

[John89v8]

If its an Aluminum block real LS2 that runs go for it for sure. I paid 800 for my LQ9 with 28K

 

[IntoTheVoid_NIN]

Hey everybody..
This is my first post on here so i hope im doing this right..

Well heres what ive found for all of us that are looking at doing a LSX swap and havent yet begun.
I found a salvage yard in wisconsin that has quoted me estimated prices for LSX engines
The place is called Cousinea auto parts and the guy i spoke to is named Adam.
heres the estimated prices for:
5.3L complete drop out w/acc and ECM...$900.00 incl shipping
5.7L complete drop out w/acc and ECM...$1200.00 incl shipping
6.0L truck complete drop out w/acc and ECM..$1500.00 incl shipping

Nope no typos there...shipping is included! and those quotes are for running engines..
He gave me quotes for rebuilders too like $250.00 for 5.7L

1234567 auto parts-Adam (sorry, no advertising)
Thanx for letting me post. Ive learned alot reading this forum. and my S10 will pwn the Kansas City streets. Look out Mustang Fans i will still be able haul furniture at 130mph!

 

[Dogsofjune]

Ive learned alot reading this forum. and my S10 will pwn the Kansas City streets. Look out Mustang Fans i will still be able haul furniture at 130mph!

Humility not being one of those. Bold claim about the streets of KC.

 

[the_coroner2002]

pic of said truck.

 

[Exclusive Xtreme]

How much after its all said and done did you spend?

 

[calebmcclellan]

Humility not being one of those. Bold claim about the streets of KC.

Lol. I haven't seen him on the streets yet

 

[hec-s10sleeper]

has any ! have any lock with long tubes. single cab short bed?? need help!!

 

[hec-s10sleeper]

longtube guys

 

[meanmaple]

I have a 2000 s10 with a 4160 and a 5.3 the motor amd tranny is in but the guy outting my truck together is stuck ad to how to get the cab to fit hes telling me all this crap thst he has to do like relocate the mounts and do all this other crap that from looking on here isnt necessary. Were havimg trouble clearimg the powersteering pump and the gearbox .

 

[ES SS]

where is the best place to buy a oil pan for my LS1

 

[OrangyX]

Here ya go ..http://www.jegs.com/p/GM-Performance/GM-Performance-Parts-LS-Muscle-Car-Oil-Pan-Kit/1221210/10002/-1

Free shipping !!!

 

[Skidder07]

the flex fuel sensor on the right frame. do u need it or can it be tune out or i jump box wired in? i read back a few post to just remove it but no one said what to replace it with. Also if any kept it can u show some pictures on how you ran your lines

 

[philntx]

Guys, please keep this thread as a Sticky. It's not for general conversation. Start your own thread for those.

 

[Castle_boss]

Roughly how much would a full lsx engine swap cost?