[4wdjoey]

We are now working with Sky Manufacturing to build ORD products. It was a huge undertaking for us to manufacture ORD products and also run 4wd Factory at the same time. Luckily, we have a great relationship with Sky Manufactuing that goes back nearly 10 years. With their manufacturing experience we will be able to lower lead times and eventually bring back all of the ORD products including the full-size kits.

Kits can now be ordered at 4wd Factory. The first batch from Sky could take 4-6 weeks but Sky thinks he can get it done sooner. Let's hope so!

Kits available as of today:
1st Gen kit (SAS011)
2nd Gen Kit (SAS013)
T-case Crossmember (non-ZR2)
Winch Mount
Wagoneer Spring Spacers

*ZR2 products will be ready to order soon

https://www.4wdfactory.com/store/categories/Chevy-S10/

 

[crewcab rabbit]

That's great news

 

[rexmburns]

I started another thread about your builders kit when I saw that you were offering it and was going to just pm you directly but I'll ask it here so everyone has the info. Can you post specs on the kit like what end links, what size tube for the links, what springs etc are included I the kit?

 

[hillbillys10]

Do you have a kit for a first gen 2wd s10?

 

[4wdjoey]

Rex, the builders kit uses Clayton springs and RC radius arms and crossmember. We can do Clayton and other radius arms and hardware but the cost will go up accordingly.

Hillbilly, we dont have a bolt-on kit for the 2wd trucks but you can use the Sky weld-on kit.

 

[rexmburns]

Thanks for the info. Do you have any install pics you could post up?

 

[terry10]

hows going through sky manufacturing going to affect the end price ?

 

[4wdjoey]

The price is the same

 

[LMs10crewcab]

Thanks for bringing the ORD kits back and keeping the prices the same! I placed an order for the transfercase xmember yesterday and can't wait to get it!

 

[4wdjoey]

You're welcome!

 

[dc5Hellfish]

Nice!! Cant wait to order my zr2 kit.

 

[Drain Bamaged]

Super ten kits?

 

[warriorcustoms]

The Super10 kit is the Builders Kit I would recommend doing a Dana 44 with a truss & mounts over the D30 with the weaker stamped stuff Jeep used... Theres a good build thread from a few yrs back that has all that info in it!!! Just My 2cents take it or leave it...

 

[jamie wallace]

good news to hear. thaks joey for all your hard work. everything i have bought from you has been great and has held up well.

 

[scrappyk5]

I have been out of the s10 wheeling game for awhile and moved onto full size with solid axles. Well last year I sold my full size I had decked out with 1tons, crossover 6" of lift and so on, and bought another s10. I was just going to do a tweak with shackles and a 2" bodylift and call it a day. Buuut after seeing all the new posts about sfa-ing these awesome little trucks and now reading this post I am seriously thinking about doing the sfa to my 89 1st gen. I am at that age where I am more into finishing my restore on my 76 vette, but I think when I am done doing my 3.4 swap in my s10, I am going to start collecting parts to go sfa. Soo, thanks for keeping these parts still available.

 

[ChrisInVT]

Super ten kits?

The Super10 kit is the Builders Kit

I was wondering the same thing. I remember the super10 kit was cheap, but when I looked at the builder's kit it was like $2k more. This was like a year ago so I may be off on my numbers, but I think it was over $2500?

 

[warriorcustoms]

The website says 1175 for the kit...
Where did 2500 come from??? Shipping aint that much lol

 

[KM346]

Thanks for keeping these alive Joey! We can use every bit of aftermarket support we can get with these trucks, especially when it comes to SFA.

 

[ChrisInVT]

The website says 1175 for the kit...
Where did 2500 come from??? Shipping aint that much lol

You miss the part where I said I looked at it over a year ago and I might be off on my numbers?

I didn't see the builders kit under the S10 section, and I wasn't trying to paw around the website on my phone either.

 

[rigidchop]

Glad the first gen kits are back. Gonna have to place an order soon.