S-10 Forum banner

1 - 6 of 6 Posts

·
bagged1
Joined
·
2,216 Posts
Most likely Summit.
Suspension products you really don't want to cheap out on, stick with Belltech. Since they give you the claimed amount of drop unlike others. Can't go wrong with a well known, and trusted company.

You're also going to need the isolator bushing and some drop shocks
 

·
Registered
Joined
·
45 Posts
do you have to replace the shocks when you do a 3/4 drop using springs and blocks? and what is this isolator bushing?
 

·
bagged1
Joined
·
2,216 Posts
If you do coils you're going to need drop shocks because you're changing the distance the shock must travel.

You won't need rear drop shocks, but they are reccomended as they help out your ride a lot.

The isolator spacer/bushing is used to correct the chevy lean that becomes more apparant after a drop...It goes between the coil and the spring pocket to even the height out.
 

·
EX-Minitrucker
Joined
·
3,978 Posts
nofx999 said:
so you need just one bushing for to correct the lean? which side does it go on?
the driver's side on top of the coil. I will agree about the coils but just look around the for sale section. there's a lot of people doing bags right now and there's lots of coils being sold for cheap. that's where i got my last 2 sets of coils and they were way cheaper than anyting else.
 
1 - 6 of 6 Posts
Top