[TubbD]

This is where I will go over any rules and qualifications is takes to join and be a member!

-Membership is free to join!

- We accept ALL makes and truck models. We want to get big

-Must have a modded truck in order to join (What needs to be done will be discussed later)

- Trucks suspension must be modded up or down 3". There are exceptions to this rule. But other heavy mods are needed


How To Join MN street trucks!

- Show an interest, get ahold of a member, then attend a few meets.

- After the meets we will vote you in or out depending how we view you as a person.

Other jazz

-Decals: Yes you gotta run one. Its not a big requirement.

-Meets: We will try to have one once a month or at least every other month. Attend them. They aren't too often. Don't go, you're not gonna be in the club. We are gonna take this seriously, otherwise we won't have a club left over.

- Lasty, we're a pretty tight group. We give haze each constantly. If we give you hell right off the bat then it shows we like you. Remember, sure its a truck club, but the driver of the truck is what matters most.

 

[blazerman]

oh noez.another mn club

 

[TubbD]

Oh, you guys have anything that'd like to be added let me know.

 

[The Griff]

 

[Slambamthankumaam]

so how do i get ahold of one guys to go to a meeting??? when are the meetings (weekends or weekdays) and where the heck are thay at? don't know how close linwood is to white bear lake being im from texas.

 

[TubbD]

Just post up or PM me that you're interested. Meetings are always posted up on here for planning then set there after. They are always on weekends it seems.

 

[Chris D.]

Do you guys have any affiliations with custom or fabrication shops for discounted rates for members?
If not, how about someone with a shitload of patience to teach me how to weld
I'm interested in joining..
I've read alot of threads and everyone cracks me up..
I mite fit in.. and if I don't, I'll just put it in dry

 

[TubbD]

No shop discounts. Plus, we like it dry

 

[95xtreme]

Do you guys have any affiliations with custom or fabrication shops for discounted rates for members?
If not, how about someone with a shitload of patience to teach me how to weld
I'm interested in joining..
I've read alot of threads and everyone cracks me up..
I mite fit in.. and if I don't, I'll just put it in dry

Yeah we are pretty laid back group of friends, a few of us do know how to weld. Just have to keep an open mind and be patient yourself. Getting good at it takes time.

As for putting it in dry, is there any other way??? Dustin told me that's the only way.:haha:

 

[TubbD]

Jim....

 

[ratrod dime]

I am interested in joining, i am currantly working on a 1988 s-10 its lowered 3/4, satin black, with orange rally wheels, and i am in the process of getting it all set up for the flame throwing compition at the ball in oct. I am calling my project "The Rat Roaster" (and I can weld as well) I am a mechanical drafter so I can design any parts needed to take to a fab shop. I live in ramsey

 

[cpolaris502]

Very cool, do you have any pictures of your truck?

I'm hoping to make it to the Frankensteiner's show too.

To be honest, we haven't had an actual "club" meet in a while. The last time everyone got together was back in April i think. It wasn't a club only meet, but more of a general forum meet.

 

[ratrod dime]

I have progress pics on my facebook account, ya i would like to get in to a club. my 7 year old son and i are at almost all the local shows, and we wanted to do something alittle diffrent, so we figured a lowered s-10 shooting flames out the exhaust should cut it. I wanted to chop the top, but that is another project another time. i am working on finding a 2.8 i can build up and make a stroker for it as well.

 

[AceHaag]

i got a 2.8 out of a 92 or 93 cant remember for sure

 

[ratrod dime]

what would you have to have for that one? The engine in mine is getting pretty tired, she has almost 200,000 miles, but the body was way to clean to not get it. even the box floor is completly solid on it. so i figured it was a good starting point for a project.

 

[Chris D.]

I'd like to join a truck or car club, but I'm not sure how the whole Toyota Tacoma thing fits in with most clubs... I haven't seen any quite like mine.

people ask me all the time why I lowered it lol all I ever see are the 4x4/Prerunner style trucks..

 

[ratrod dime]

here is a pic of the truck i am working on. i got the spark unit for the flame throwing exhause done and wired in this weekend.

 

[supertrucker1978]

Holy crap......Theres life in here!!!!

 

[cpolaris502]

That's a clean first gen. Are the cab and the bed different shades or is it just the light?

 

[ratrod dime]

its just the light, when i got it it was 2 tone blue and gray, but i had to install new cab corners, and rockers, other then that it was pretty straight and clean, i was suprised since the guy i got it from always had a topper on it the box was really clean in side, no rust a all. just scraps from the tools he hauled.