S-10 Forum banner

Isuzu S10 seats 馃槅

1204 Views 13 Replies 6 Participants Last post by  MetallicaBreath
So I think I'm in the right place for this subject. I recently picked up an Isuzu Hombre. 4.3l 5 speed stick. The question I have is about the seats. There is a really nice bench in there. But no arm rest. Will seats from from an S10 fit in it? I have some 60/40 I can get a hold of from an 03'. I'm looking to do minimal work on it so I'm really just trying to swap it. Any info would be greatly appreciated and very helpful. Compatability options so on. Thanks for looking.
1 - 7 of 14 Posts
If your Hombre is a 98-00, they should bolt right in.
Yeah it's a 98. Forgot to mention that xD. Seeing all the trucks here, it's amazing what some people have done to them! I have big plans for this truck but I need to be comfortable first lol.
Did you have to do any drilling?
Did you have to do any drilling?
98 Hombre = 98 S10. On the interior the only difference is the steering wheel airbag. Every other part is identical in the cab.

On the outside it's the front sheetmetal and the bed that are different.

This was my old 00 Hombre. I swapped in an 03 60/40 bench and a bunch of other S10/Blazer parts.

View attachment 353380

View attachment 353381

View attachment 353382
No drilling needed! Just swapped from an 03' S10. Mine a black but those grey ones would match perfectly. Beggars can't be choosers though. The only issue I have now(lol) is the I have to remove the cup holder on the on seat because I can'e get in to 2nd. I'm short so the seat has to be up a bit. I found a nice spot where I can still get into 2nd but the stick hits my drink xD. On to seat covers now I guess. Any reccomendations?
98 Hombre = 98 S10. On the interior the only difference is the steering wheel airbag. Every other part is identical in the cab.

On the outside it's the front sheetmetal and the bed that are different.

This was my old 00 Hombre. I swapped in an 03 60/40 bench and a bunch of other S10/Blazer parts.

View attachment 353380

View attachment 353381

View attachment 353382
What are those switches on the left and right of your stick?
Yep they're a direct bolt in like you found out. If you get a short console like I had in mine it has a cupholder. There's also the door panel cup holders too.
Yeah I got the detachable cup holder that sits between the shifter and the seat. I'm so short that when I put the seat where I like it, going into 2nd is a chore because it hits the cup holder. Anyways, you know what size speakers go in the door and the dash?
1 - 7 of 14 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top