S-10 Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
674 Posts
Discussion Starter #1
I just order 2 inch drop spindles from Jegs for my Xtreme....Help me out....I have done plenty of Coil springs but have never done spindles...Help me out here...Pictures would be great..Thanks
 

·
Registered
Joined
·
25 Posts
The instructions should have pictures. They are pretty simple. I did mine last weekend. There are some other people w/ similar questions on here that got some good responses. Just get a front end alignment after you are done! I love the way mine sits now (2/3 on top of zq8). The only thing that gave me and my dad some trouble was getting some of the cotter pins out. They were seized in and we had to tap them out.
 

·
Registered
Joined
·
129 Posts
I did my spindles this weekend and well the instruction said hit the lower part of the spindel to get the ball joint to loosen... and I pounded for about 30 mins and gave up...had to get a pickle fork.....screwed up teh ball joint boots....so be careful....the lower ones can be a pain....
 
1 - 3 of 3 Posts
Top