[nasty99vette]

I was wondering if anyone has tryed to install 2010 SS Camaro wheels on their truck yet...and what kind of problem have you runned into?
Post Pics if you have any...

 

[S15vortecpwr]

they have a diff bolt pattern, a little searching action will result in a few threads about this.

 

[K Dawg ONE]

they have a diff bolt pattern, a little searching action will result in a few threads about this.

^^Fail.

Bolt Pattern: 5x120.65
Offset Range: 35 to 45
Wheel Size Range: 20x8.0 to 22x9.5
OEM Tire Size (Front): 245/45-20 (245x729 mm)
OEM Tire Size (Rear): 275/40-20 (275x728 mm)

They are like 94+ f-body wheels in that you will need and adapter for 2wd but fit fine on 4x4.

120=4.75. It would be the same as putting BMW wheels on which has been done 100 times over.

 

[K Dawg ONE]

Oh, and please do it! I keep seeing sets of RS wheels for on CL but havent had the balls to buy a set yet, lol!

 

[nasty99vette]

yea i know they will fit, im just trying to figure out what size spacers im gonna need. Also i wanna get rid of them massive front wheel hubs, just in case i have to run a small spacer the hub wont clear the center of the wheel. But it is a work in progress guys, and i will post all the info and pics once i get them installed. They are 2010 Camaro SS 20inch wheel and Pirelli tires. Brand New Never driven on in Grey...i Paid $750 for the whole set of Ebay. Dirt ass cheap the 2 rear tires cost that alone.

 

[Zeeke98]

120.65 does not equal 120 Just because you can doesn't mean you should. New Camaro wheels are also hub centric so you should have a spacer/adapter with the proper size hub lip for it to fit on.

 

[nasty99vette]

Ok i test fitted the wheels and did the mock up...im gonna need to run a 1' adapter which is 2 inches total for them to clear the front wheel hubs and for them not to stick out past fender at all. its gonna be close. The adapter are 5x4.75 to 5x120 on ebay for $59.99 per set of 2 so $120.00 total for spacer. i have a few pictures of the wheels i will post up on this thread in a few hours to give everyone a idea of what they are getting into if they want these wheels.

 

[K Dawg ONE]

Pics Pics Pics!

 

[AWD V8]

The wheel is 20 x what?

 

[nasty99vette]

20x8 and 20x9 but im telling you guys these wheels look "HUGE" as hell...im uploading pics now be patient

 

[Slowlowandbangin]

subscribes

 

[nasty99vette]

 

[nasty99vette]

Sorry for such a large ass picture...i dont know how to edit and make the pics smaller i uploaded it off my photobucket. Oh and also to make it all clear these wheels will bolt right up to the rears no problem but will rub the bed and leaf spring, so you will need a 1' spacer= 2inch all around!

 

[bagged4life2]

I like em, need some tires or stance or something though, the bs isn't helping it.

 

[nasty99vette]

 

[nasty99vette]

 

[firstgenon24s]

wtf? those just dont look right,not feelin em.

 

[70welder]

i love the wheels but it looks like they need more work to fit right

 

[nasty99vette]

wtf? those just dont look right,not feelin em.

Yea well im not felling them donk 24's either...this is just a mock up to get a idea what they look like on a s10 since there aint no one else yet posted pics. My truck has not been lowered yet, and it does not have spacers yet.

 

[bagged4life2]

Yea well im not felling them donk 24's either...this is just a mock up to get a idea what they look like on a s10 since there aint no one else yet posted pics. My truck has not been lowered yet, and it does not have spacers yet.

HAHA i was thinkin the same thing... could look killer when set up right... but yea the donk riding 24's...