S-10 Forum banner

1 - 3 of 3 Posts

·
Just Call Me Dick
Joined
·
305 Posts
Discussion Starter #1
i have an 86 2dr jimmy with power door locks. my question is that i can not lock or unlock my doors from the switch on the drivers side but i can only lock them from the switch on the pass side. i have changed out switches on both sides 4 times, and motors 3 times. i have heard that there is a wire that breaks off in the harness going to the door but i can not get to it and check it. do yall have any other fixes. if not i am removing my outside and inside handles and locks and putting poppers on. :bash:

thanks, michael
 

·
Registered
Joined
·
12,726 Posts
the wires break right inbeteen the door and the body in that little boot. i ended up cuttin the boot off and repairing the wires then putting the boot back on and taped it up good.
 

·
Just Call Me Dick
Joined
·
305 Posts
Discussion Starter #3
i was trying not to have to do that but i guess i have to so i will try it tomorrow at work and see if it is the wire. thanks for the help
 
1 - 3 of 3 Posts
Top