S-10 Forum banner

1 - 8 of 8 Posts

·
Weeeeeee
Joined
·
2,495 Posts
gimme 25 bucks and i will send you the plate
 

·
Weeeeeee
Joined
·
2,495 Posts
it is a matter of unbolting two bolts, placing a plate, then bolting it back down.
 

·
Weeeeeee
Joined
·
2,495 Posts
there are two types that will work one is a screw in fitting that goes to a line hidden behind the A/C... the plate goes directly between the EGR valve and the intake manifold...
 

·
Certified MASShole
Joined
·
4,372 Posts
does this mod hurt the motor at all?
 

·
Clean N' Dark
Joined
·
1,921 Posts
rlith, you have to EXPLAIN the possible side effects instead of just letting them blindly walking into it without giving the pros and cons.

BlkS10Kid2002,

Lot's of people have done the mod and have really liked it. But on the other hand, you could have increased detonation and pinging due to higher combustion temperatures. If you do the mod and their is detonation, remove it immediately before it causes engine damage due to preignition.
 
1 - 8 of 8 Posts
Top