S-10 Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
78 Posts
Discussion Starter #1
O.K., here's the deal. Have a 01 Extreme with the bumper removed and a steel rollpan and, I am currently running the stock 16's. In the future will probably run 17 or 18's. There seems to
be approx. 1 3/4 inch in front and 3 3/4 inch rear between the top of the tire and the fender flare. Am thinking 2 inch spindles
in front and 4 inch blocks in rear? Should that drop me some more and will it be pretty much level? Also can I run the factory shocks
and front coils? Will tires rub ? Let me know what you think cause
I'm getting anxious to drop her. Thanks and any pic's would be cool.
 

·
Registered
Joined
·
2,850 Posts
here is one with 3 inch drop springs and 3 inch blocks

www.geocities.com/lawsons00xtreme

what i would do is measure from floor to top of front fenders and same in back

then you can see the difference. lets say right now front is 2 inches lower you can go with spindle and 3 inch blocks and back will be one inch higher

the tires will not rub you will be fine

tony
 
1 - 3 of 3 Posts
Top