S-10 Forum banner

1 - 19 of 19 Posts

·
2 Litre Terror
Joined
·
1,964 Posts
Discussion Starter #1
Just started on them today. Finally no rain. Took the factory tails and after scuffing them w #2 steel wool and washing w alcohol, applied masking tape masks for the BU lights and.....#24 Nascar roundels for the circular masks...(Sorry guys, you didnt think I would waste someone else on such a task) But in all honesty, for 69 cents a piece they are vinyl and work great. 3 coats of primer, 5 color coats as its pretty transparent. when they dry for about a week, will color sand and clear w a couple of coats..total cost.....About 15 Bucks...Let me know what ya think.
 

Attachments

·
2 Litre Terror
Joined
·
1,964 Posts
Discussion Starter #2
This is with the masks removed. Drying and almost ready to go back on...Will post a pic of them on in about an hour or so..will also take a picture in the dark. Think they will look sweet at night..
 

Attachments

·
2 Litre Terror
Joined
·
1,964 Posts
Discussion Starter #4
A matched set...Should be on in a little while....:thumbup:
 

Attachments

P

·
Guest
Joined
·
0 Posts
It will be interesting to see what they look like on the Blaze.

Post some pics when they are on.
 

·
2 Litre Terror
Joined
·
1,964 Posts
Discussion Starter #6
Should be up in a little bit Phat....Held them up and they look good..Different, but good....Honestly they are like nothing else I have seen so that right there makes me like em.
 

·
2 Litre Terror
Joined
·
1,964 Posts
Discussion Starter #7
Kind of a vertical Skyline look to them...LOL
 
P

·
Guest
Joined
·
0 Posts
02REDXBLAZE said:
Should be up in a little bit Phat....Held them up and they look good..Different, but good....Honestly they are like nothing else I have seen so that right there makes me like em.
:werd: I mean if they are unique they look good.

They will probably look nice on your Blaze cuz it is RED!
 

·
2 Litre Terror
Joined
·
1,964 Posts
Discussion Starter #9
Mounted em up real quick for a look see...They're color sanded, just need clear coats......
 

Attachments

·
2 Litre Terror
Joined
·
1,964 Posts
Discussion Starter #10
3/4 Side View w/ lights on. Working Mids tonight so I will take a better night pic at work...
 

Attachments

·
2 Litre Terror
Joined
·
1,964 Posts
Discussion Starter #12
Thanks Bud. Came out nice IMO...I like them. Should color match nice with the clear coat on them...
 

·
2 Litre Terror
Joined
·
1,964 Posts
Discussion Starter #14
No becuase in order to not screw up the masks, the lights were sanded before the masks went on. Masks were applied and than painted. By doing it that way the lenses will be brought back to their original lustre w the clear coats...
 

·
BLAZIN SADDLE
Joined
·
1,394 Posts
THAT LOOK GREAT!!!!!!!!!!!!!!!!!!!! :thumbup:

______________________________________________
02 WHITE BLAZER X
1-Leather seats and top door panels
2-GPS alarm
3-Billet Bowtie
4-255/45/18 Pirelli Zero's on HALO rims
5-Boston Acoustics speakers in doors/dash
6-Pioneer 6x9's in the back seat area
7-K&N GEN II
8-FlowMaster 40series with 2 1/4 pipe Magnaflow SS tip
9-2/3 DROP with Belltech Spindles and Blocks
10-Poweraid Spacer
11-Removed MAF Screen
12-JL amp and one 10” JL subwoofer
13-SS mirrors WHITE, matching handles
14-Shaved Emblems
15- HPPIII

And a list one mile long
 

·
2 Litre Terror
Joined
·
1,964 Posts
Discussion Starter #16
Thanks bud....Holy crap just noticed...4 more till a 1000 LOL.
 

·
2 Litre Terror
Joined
·
1,964 Posts
Discussion Starter #18
Took this before I left for work....
 

Attachments

·
Self Portrait
Joined
·
1,632 Posts
Nice work! I haven't seen anything like it on anyone's truck so you get extra props for originality!
 
1 - 19 of 19 Posts
Top