S-10 Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
123 Posts
Discussion Starter · #1 ·
i looked through old post and still have question. im running jason cup with re7 up front with a 235/45/r18 i think it ='s 25.4 tire height. im in the middle of removing the wheel wells and when i let the truck lay it looks like the bags dont have enough room. i heard 3 inch is what most bags need.. what to slams need? should i cut cup? how much do i cut out?
 

·
Registered
Joined
·
123 Posts
Discussion Starter · #2 ·
im running stock arms right now... also when i buy suicidedoors arm when they come out do i need to get new uppers again
 

·
DOOR'D FOR HER PLEASURE!
Joined
·
5,688 Posts
im not sure on yer bag size, but im runnin conti 2600's up front but they are 3" collapsed and i cut the cups down to 1 1/4" and im runnin stock arms and 2" drop spindles, 18" wheels with 40 series rubber
 

·
former owner
Joined
·
7,389 Posts
ignited said:
18" wheels with 40 series rubber

:rolleyes: He'll need the treadwidth too to figure your tire diameter and relate your numbers to his. 18" wheels with 40 series means little other than you have a tire diameter that is anywhere from 24.5" to 26.0".

I hate when people do that.


noma01 said:
also when i buy suicidedoors arm when they come out do i need to get new uppers again
Just cut the lowers and then you won't have to buy new uppers.
 
1 - 5 of 5 Posts
Top