S-10 Forum banner

Colunm Shifter

634 Views 5 Replies 3 Participants Last post by  Rhotpursuit
The handle on my column shifter has to be pushed forward so the key can rotate (or do what ever it has to do) so it can be removed. It feels like there should a spring in there to constantly keep the shifter in the correct position and that spring has broken or departed the vehicle so to speak.
I see in the GM parts catalog on line that there is a unit that contains the shifter and immediate associated parts in a sub- assembly. There is no mention of the automatic shifter in the Haynes Book; just the manual shifter is mentioned. Anybody ever mess with this?
1 - 2 of 6 Posts
Check page 15 post 281...

I do t know. I didn’t remove any of the shift components except the shifter. When we did the LS swap it was a good time to swap the entire column for a floor shift model also.
  • Like
Reactions: 1
1 - 2 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.