[97SS-10]

I ordered a set of DJM 1" drop springs from Stylin' Concepts. I put them on my truck and it lowered it almost 3". I took them back off, put the stock ones on it raised it 3", then today I put 4cyl stock springs and it lowered it over 2 inches but it still rubs when I hit bumps. Can anyone tell me how I can lower the front of my truck 1" with out Airbags. I have Spindles but I needed to lower it another inch, reliablly. HELP!!!!

 

[rick]

It has to do with spring rate

The springs are probally all 4 cyl. springs.I used some 1 in.springs from summit ,that worked great! Im not sure but they are probally eibachs.

 

[Iowa Bob]

I used 2" Belltech coils with my spindles, and they work great, it never bottoms.

 

[98 SS ON NOS]

IF YOU HAVE A v6 the coilss differ a lot from 4 cylinder. thickness of spring is different also. you need a 6 cyl spring