S-10 Forum banner

Carolina S-Series - Pay It Forward

16130 Views 149 Replies 36 Participants Last post by  sockjock
(edit from sdime98)
ok...here's the deal. put stuff here that you are looking to barter or work out a trade. save the selling for the other thread.

what other thread, you ask? this one right here.


- don't chit chat. post up what you've got, and what you'd like to get - and leave it at that.

- if you see something someone has posted that you are interested in, PM them...

- if you manage to work a deal with someon, post in the thread, to let it be known this item has been accounted for, and i will edit your post, and remove that item from your original post.


Rules are simple.

- list what you have to give away to help some people out.

- list what you need so you can pick it up for free or on the cheap(shipping).

- the catch is you have to give in order to receive.

only cost to receiver is shipping/pick up, and the giver gets to feel good about helping somebody and knowing he can get something when he's in need.


I have from a 94 TBI 4.3:

complete working AC system from the firewall forward.

inner fenders

wrecked bed and right front fender (tailgate/skin, floor, some bed rail damage), great for making filler plates

factory leafs and coils.

all emissions equipment except cats.

cruise control module/motor deal.
See less See more
1 - 8 of 150 Posts
i need a pair of front fenders and a fuel cell, a tilt column if anyone has one.. let me kno what yahll need and ill see what i can do..
I have a tilt column out of a 99.
wonna hook a brother up with it ????? ill come get it tonight..
$20 and its yours. I won't be home until late tonight...and i'm living in Burgaw now.
u think t will work in my 96 ???? and does it have a key to it ??? ill get it from u if it will work.. hit me up 431 5844
I got a bunch of stuff:

A project dash bezel. Needs alot of work
what does it look like ???
I need a BCM for my wife's 97 Blazer.
i have a BCM out of a 00 s10 4x4 that had a 4.3 AUTO trans in it.. let me know if that will work and ill dig it out.. im from wilm too.. so yeah..
alright man.. let me know.... if u need me too i can get you the numbers off the BCM if that will help.. just let me kno whats up.. ill go ahead and dig it up..
I'm not sure if a BCM from a 2000 model will interchange with a 1997 model. I will have to check on that.
i dug the BCM out and here are the p/n is 1628395 it also has CHAU in the upper right corner and 878395M1729126NE under the barcode. LMK if it will work..
If I remember I will stop by a local garage after school and run those numbers by them to see if your BCM will work for me. Thanks for digging that out for me.

did u find out if it will work ??? and yeah that price to paint it sounds kinda high to me..
1 - 8 of 150 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.