[NTI94S10]

(edit from sdime98)
ok...here's the deal. put stuff here that you are looking to barter or work out a trade. save the selling for the other thread.

what other thread, you ask? this one right here.

also,

- don't chit chat. post up what you've got, and what you'd like to get - and leave it at that.

- if you see something someone has posted that you are interested in, PM them...

- if you manage to work a deal with someon, post in the thread, to let it be known this item has been accounted for, and i will edit your post, and remove that item from your original post.

---------------------------------------------------------------------------------------------------------------------

Rules are simple.

- list what you have to give away to help some people out.

- list what you need so you can pick it up for free or on the cheap(shipping).

- the catch is you have to give in order to receive.

only cost to receiver is shipping/pick up, and the giver gets to feel good about helping somebody and knowing he can get something when he's in need.


________________________________________________________________________________________________________________________

I have from a 94 TBI 4.3:

complete working AC system from the firewall forward.

inner fenders

wrecked bed and right front fender (tailgate/skin, floor, some bed rail damage), great for making filler plates

factory leafs and coils.

all emissions equipment except cats.

cruise control module/motor deal.

 

[teachinlow]

i have headlight covers off a 99 f150

and a trunk lid off a 95 integra 4 door, with tailights shaved, could be nice with some work

 

[thenick]

I have to give....
4 "10 electric fans from Nissan Titans flow approx. 1000-1200 cfm.
A full e-fan setup from a Nissan 2004-2007 Maxima.
1 good 225 50 16 Fuzion ZRi tire 10k mi.
---------------------------------------------------
I would like.....
all for a 99 Sonoma
Smooth Roll Pan
Drop Spindles
Windshield
Power Window kit.

 

[stepasyd]

I'D LIKE:

- a 98+ ashtray..(if i don't hear back from keegan, just the part that has the 2 screws in the front, and slides into the tracks at the back, i don't need the actual ashtray insert, or the lighter assembly...)

- i would like a 2nd gen regular cab headliner, condition doesn't really matter, the one that came in my truck originally, i fubar'd way back when i was young and dumb, i think it can be fixed, i'm just weary of attempting to fix it, and would prefer to probably just start from scratch.

- a stock muffler would be nice, in good shape, i recently attempted a $4 patch kit on my flowmaster, just to try to hold me over, its already began to fail on me...if anyone would be up for trading a stock muffler, for a flowmaster that is in decent shape, just rusted thru on a small spot, where water ran down between the cab and bed, and settled at the bottom of the muffler, and just rusted thru a slight bit, could probably be plated and patched way better than what i've done..

I HAVE:

alot of random 98+ interior odds and ends...a pair of kick panels, has a small crack in one, can be repaired if needed, a few doors sills, a pair of smoothed black primed 98+ speaker grilles, a few dash vents, a 1st gen 86+ dash bezel, w/out headlight and hvac? controls, whatever panels go on each side of it, would be nice for sanding and paint..i have some 98+ hvac ductwork, some behind-the-dash wiring that i pulled out of my spare dash i have, farly complete, as far as i know..just a ton of spare interior plastics for the most part..

i also have a set of 5x5 steel wheels that came off of my dad's GMC....never had any luck selling them...

if anyone posts up anything i may have, it may refresh my memory and i'll remember, everything i have is so damn scattered all over the place..

 

[built2rail_1]

I have a
1gen Cab,Hood,Fendors,Doors,and Rad support.
1gen Blazer Interior.
Lots of Stereo plugs and kits.

Would like
Roll pan, Tail light fillers, 89-94 2wd Toy valance

 

[Merritt]

Parts I have:

Wait4Me tuned PCM for '03 4x4 4.3 auto(not sure what diff years it'll work for)
Stock rear shackles for 4x4(don't know if they're different than the 2wds
I'll look through my stuff and see if there's anything else I don't need taking up space.

Jason if I knew you needed a stock muffler I would've kept mine, I just threw it in the scrap pile when I had my exhaust done.

 

[van_wilder]

i have a 2nd gen fleetside tailgate in primer

want? not sure?

and yes the mufflers are interchangeable... both 2.25 center in 2.25 offset out

 

[orangesonoma]

i need a bed...fleetside only lol

to give? i can give my love...or electrical help


Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

 

[SEARCH]

oh im also looking for a floor console for a manual trans and bench seats.

 

[NTI94S10]

i need a stepside bed....

 

[baggedzq8]

i might have some free stock 2wd s10 spindles and one upper control arm, 98+ turn signals amber, stock 98+ 2wd blazer spindles only they are bare(not rusted though) but i wont use them so they are free. i also have 2 93/94 grille shells a little cracked but not very bad. be good if you were doing a swap but couldnt find a good one yet.

anyone want any of that let me know, just pm me.

 

[low98]

i have a 98+ newer rear bumper flat black-ed, a stock 94-97 am/fm radio

i need some lowering coils and 2" angled blocks

 

[Merritt]

Found the stock air intake/air box/filter if anybody needs one. '03 4.3L

 

[Layn Dime]

i have a 94 fully tweeded dash
98+ bumper and valance

need a bed

 

[NTI94S10]

i need a bed, fleetside or stepside. and possibly a cab.

i have basically whatever anybody needs besides cab/bed from a 94 x-cab, including 2 dashes, one charcoal and one gray.

 

[Squeegee]

i've got a set of first gen taillights with the chrome trim.

not really needing anything but would like an e-fan

 

[firefighter5325]

iv already swaped out parts for a bumper and a valance just posting needing parts on the thread but if any one needs some misc parts from a 94 cab shoot me pm ill let you know what i have left the passenger ext cab section has been cut out for another member but alot of good sheet metal left if anyone needs it

 

[firefighter5325]

anyone got a stock (notcut) bedfloor No sides just the floor they want to get ride of i want a solid floor when i do my bodydrop

 

[camaro590]

i need a first gen hood cause mine is wasted lol. if anybody close to me has one laying around pm me plz.

 

[Twiz]

I have an extreme grill in red and soon a 2.2 motor from a 97 both can be up for trades