[bremer]

i have a triangulated 4 link with behind the axle bag brackets running #2600 bags. the ride is ruff/bouncy. i heard that firestone f900 bags ride better than the 2600s. i've also have heard that if i got some cantilever bars and ran my 2600's on those bars my truck would ride better. does anyone have experience with both the f9000 and canti bag setups? which one should i do?

 

[suicidal]

Behind the axle, F900 bags will ride smoother than 2600's. the advantage of doing a lever setup with 2600's is more lift, and a smooth ride. either setup will ride good. if you are looking to get more lift, i would get the lever attachments from suicide doors and add them to your existing 4 link setup. if your looking for a better ride, just do the F900's, they will also give you more lift than the 2600's.

 

[bremer]

thanks for the info. i was leaning towards f9000's anyways because of cost and ease of installation compared to the cantilever bars.

 

[low-blazer]

You'll definatly get a better ride either way. I love the way my F9000's ride, and you'll get an extra couple of inches of lift to boot. You may hafta re-do your upper mount though, the compressed height on the F9000 is 4"...a little taller than the 224c...depending on how it's setup now.

 

[IRSd_mini]

I've tried it all... several times. If it was me, on my truck, I would go with the F9000s.

 

[neverfinished94]

i've had F9000's and liked them alot

 

[bremer]

what pressure do you guys run in the f9000s? i'm running between 20 and 30psi in the 2600s.