S-10 Forum banner

1 - 7 of 7 Posts

·
They took our jorbs.
Joined
·
3,797 Posts
Discussion Starter #1
Im gonne be doing an additional 2/2 drop on top of the ZQ8 suspension, for a total of 3.5/3.5. Do you think that i will have a major problem with bottoming out or having my back end hit the bump stops. Better yet, will i have to cut off the bumpstops.
Thanks alot
 

·
Registered
Joined
·
52 Posts
Yes, the rear bumstops need to go. Maybe the brackets as well. I'm assuming you are using spindles in the front so the front bumstops won't be affected.
 

·
NTBSSHEVN
Joined
·
9,248 Posts
Yep get rid of the bracket too. I had a 4 inch in the back of mine and it hit the bracket hard.
 

·
Shit's Weak
Joined
·
1,970 Posts
im with nchevyhevn. just get rid of the whole bracket. you probably won't hit the axle on frame with that drop so there is no need to try to keep part of the bumpstop or bracket.
 

·
SuperFly
Joined
·
261 Posts
rid of the bracket and try and find a set of bumpstops that are like 3/8'' tall. i put them on the bracket for my 4/6 drop
 
1 - 7 of 7 Posts
Top