S-10 Forum banner
Status
Not open for further replies.
1 - 20 of 330 Posts

·
ITS NOT EASY BEING EASY, MODERATOR
Joined
·
19,339 Posts
Discussion Starter · #1 · (Edited)
time to show off all that hard work.

post pics of your truck , a link to your gallery or somewhere for more pics, some specs, some details....

projects, daily drivers, show quality, trailer bitchs all welcome as long as that body hits the floor.

you should only have 1 post in here.

this is not the place for questions or comments or any bs.

if your post anything other than pics of your truck, your post will be deleted.

get it, got it, good. enjoy.
 

·
ITS NOT EASY BEING EASY, MODERATOR
Joined
·
19,339 Posts
Discussion Starter · #2 · (Edited)
94 s10 2.2 5 speed
2000 sonoma front end
4'' bd. lays 255 35 20 all around
tubbed firewall
cab floor tunnel for driveshaft
raised clutch reservoir
relocated most all wiring underhood wiring to underdash.
geo metro brake booster
stock control arms for now
air ride with custom built 3 link
dual sanden edc's 6 3/4'' valves lift valves 6 1/2'' dump valves 2 viair 400s 2 stainless 5gal tanks

gallery of pics



 

·
Registered
Joined
·
288 Posts
ENGINE

SBC 350
Dual Plane RPM manifold
advance adapter headers
flowmaster 40 series mufflers
deamon 625 CFM carb
kick ass air filter
turbo 350 tranny
lokar shifter
16 gal fuel cell
Tons of chrome
brake booster under dash

EXTEROIR

Shaved antenna
shaved whiper squiters
shaved windshield whipers
shaved door handles
shaved 3rd brake light
shaved gas door
shaved tail lights
shaved rollpan & tailgate into 1
frenched 5 inch LED tail lights
frenched lincese plate
4 inch body drop
43 x 30 sliding rag top
5 inch chop top
99 sonoma front end
billet grill
shaved/ smothed firewall
semi gloss self tinted root beer primer

INTEROIR

2002 dodge neon sheets
sheetmetal dash
fiberglass door panles
fiberglass centercouncle with sub
leather wraped seats
flaming river steering column
colarado customs steering wheel
autometer gauges

sespension/ wheels

20/22 tezzen decco rims
245/35/20 265/35/22 perilli tires
custom frame
custom 4 link
tubuar control arms
drop spindles
firestone 2600 air bags
oasis comressor
manifold valves
shit load of air tanks



gallery
Http://www.streetsourcemag.com/Profile.aspx?ProfileID=23492
 

·
Oh, yea...
Joined
·
966 Posts
Hey this thread died? C'mon doods, lets bring it back!
My 03 dime. Hope the picture doesn't look too crappy...
 

Attachments

·
ITS NOT EASY BEING EASY, MODERATOR
Joined
·
19,339 Posts
Discussion Starter · #19 · (Edited)
my new project.

98 blazer 2dr 2wd.
100% new frame from firewall back. Going to build new frame 100% front to back with equal length front control arms.
4 link built under rear axle
275 25 24'' pirelli's with 24'' dropstar 02 wheels
keeping back seat
right hand drive / sheetmetal dash
8'' adjustable body lift
tubular control arms.
8 3/4'' gc 800's for lift 8 gc 450s for dumps
4 contitech 4ply 2600 bags dual 3/4 port
1'' stainless braided hose
huge 285 nitrogen tank
dual chrome sanden engine driven compressors.
2 air zenith compressors
2 stainless 5 gallon air tanks.
will have the boost air setup
will have a huge audio/video setup.
many custom mods plus all the normal ones..
very original door mod ect ect ect


GALLERY OF PICS


how it sits right now.






 
1 - 20 of 330 Posts
Status
Not open for further replies.
Top