[zaroot]

Want to take the 2" body lift off my truck and I lost the bag of stock cab/bed mount bolts.

How long are they? Thread size and length? Diameter? How many? Nuts or washers? All I remember is they have 15mm heads.

If anyone in the Blacksburg, VA area or Baltimore, MD area has a set, I will come buy them or possibly trade you my BL for them. I did a sas and my truck doesn't need the 2" BL anymore.

Thanks

 

[neo71665]

hmm, I have a set but the from a blazer

 

[deathphoenix99]

just go to a junkyard and pick up a set, or take one bolt out, measure and take off 2 inches to get a stock bolt.

 

[lazer]

yeah but size are they, mine stock says 15/32" or 11.91mm when i check it on a measurement, what is that? where do you get body bolts from, at this point i dont care how long as long as they thread and are the right grade, ive been cutting alot of bolts to length anyway, seems to work.

 

[Sonomanclature]

When I dumped my BL I didn't have any of the stockers either, just took one of the cab bolts, and one of the bed bolts, went to the hardware store/part store. matched the thread and subtracted the length of the lift puck, walla stock body bolt. head size doesnt mean much to me any more, if it threads in for me it will work, but there is a lil more not worth mentioning.

 

[lazer]

what size is a gd body bolt?

is it standard or metric?

nm its metric

 

[earlehd]

wish we were closer, I would swap

 

[Cwhite138]

thread is 12 x1.75 IIRC, I was chasing mine the other day. the length, I can not remember right now for a fact.

I was moving the rad support body mounts up yesterday because of the way my new frame mounts for my bumper are, and I would guess they are 5".

I guess mine is a blazer but I doubt they are different, not sure tho

 

[Nashbc]

Good day

I have a Chevy S10 V6 1991 extended cab

I can't find a replacement for
The nut plate or what ever is used to mount body to frame (cab)

Please help me identify the name or part number of the "nut plate" and the size of the bolts used mine all rusted and broken

The nuts I found look like a cone plate nut of some kind

 

[DRKRAZYRICH]

Want to take the 2" body lift off my truck and I lost the bag of stock cab/bed mount bolts.

How long are they? Thread size and length? Diameter? How many? Nuts or washers? All I remember is they have 15mm heads.

If anyone in the Blacksburg, VA area or Baltimore, MD area has a set, I will come buy them or possibly trade you my BL for them. I did a sas and my truck doesn't need the 2" BL anymore.

Thanks

AFTER SOME RESEARCH and my brother pulling a bolt calling chevy parts
we got M12 x 3.5" now for a 2" body lift l d say go with 6inch long M12 (12mm) BOLTS AT LEAST

 

[Hillbilly 3181]

thread is 12 x1.75 IIRC, I was chasing mine the other day. the length, I can not remember right now for a fact.

I was moving the rad support body mounts up yesterday because of the way my new frame mounts for my bumper are, and I would guess they are 5".

I guess mine is a blazer but I doubt they are different, not sure tho

Hey I have a question you might be able to answer a friend of mine gave me a 3 inch body lift kit but he doesn't have the bolts what length do you think that would be the reason I ask is I see your blazer is like mine and lifted about were I want mine

 

[TomA]

Hey I have a question you might be able to answer a friend of mine gave me a 3 inch body lift kit but he doesn't have the bolts what length do you think that would be the reason I ask is I see your blazer is like mine and lifted about were I want mine

Here are the instructions with parts list for a 2" kit. Add 25mm length to the bolt sizes listed for a 3" kit.