[RedSpeck_09]

i have a set of rear discs off of a 99 zr2 blazer. is there any way that i can get these to work on my truck? i know i'll have to get different rotors. i know i need the 2wd rotors, but will the backing plates and calipers still work? i need to know pretty soon because i need to put my rear back together. thanks a lot.

Brian

 

[RedSpeck_09]

bump

 

[CenTex]

Go here. you will need spacers on the braket to make the caliper center onto the disk.
http://www.s10forum.com/forum/showthread.php?s=&threadid=8451

 

[RedSpeck_09]

i looked through that thread but it just deals with lt1/ls1 brakes. i can't use the ls1 brakes because the calipers won't work.

 

[reyess]

hay red
try going here this guy can sell you the backing plate.
http://64.4.10.250/cgi-bin/linkrd?_...?ViewItem&item=2436346485&category=33564&rd=1

 

[reyess]

sorry red,
kill that reply.
here's the good one.
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?viewItem&item=2436346485&catagory=33564&rd=1

 

[RedSpeck_09]

thanks man. that guy is really expensive though. i've looked at his stuff a few times.

 

[S10Fan]

Rotors and Calipers are really inexpensive at Advance Auto and Auto Zone. I would check with the dealer on the backing plates. If you have a friend working at a shop somewhere he may be able to get a wholesale price. I’ve found that some items are just as “cheap” at the dealer as they are at a junkyard.

I’m doing my 87 with Cadillac parts, finding the time to finish it is the problem! LOL!

 

[reyess]

no prob... man