[bk2life]

...this is all good info that i am revisiting as it is getting time to upgrade the front brakes

 

[SSandfish]

x3 on the Kore C6 setup. Just completed it a couple of months ago. Yes, it is a bit on the expensive side, but I guess it depends on your overall plans. They have been perfect and once I got through the issues with the Willwood MC (see other post), I am VERY happy! Installation was pretty simple overall. I almost need to wear a pair of goggles to catch my eyeballs if I smash the brake pedal! This thing stops!

Oh - And Tobin and the Kore3 team were great. Besides the initial assistance, I had an issue with one of the caliper pins and they overnighted a full set of 4 pins and seals. Issue resolved! Would happily buy again.

 

[SSandfish]

One additional note on this kit. I have the Belltech drop spindles, but you have to modify the stock ones as well. You need to do a little bit of clearancing on the spindle in the location shown below for the caliper bracket to fit flush. Simple work with a flapper wheel and then a little clear-coat...

 

[bk2life]

For what it is worth, i ended up going with the wilwood 6 piston brake set up.

 

[dnyce]

Put some tubular arms on that thing, fancy it up alil (more, with those brakes which look great)

 

[nfamus10]

bigbrakeupgrade.com is what Chris used. Tons of stuff at a good price on there.