S-10 Forum banner

1 - 3 of 3 Posts

·
Aviation Ordnanceman
Joined
·
201 Posts
Discussion Starter #1
Well after some deliberation, I'm gonna try to do ALL Autometer Phantom gages in the S-10.

I'm gonna get

3 3/4" Electronic Speedo (120 MPH)
3 3/4" In-dash Tach

2 1/16" Voltmeter and Oil Press in a dual A-pillar pod

2 1/16" Fuel Level and Water Temp (I'll find somewhere to put them)


Now what kinda sending unit do we have for the fuel quanity, so I can order the right gauge.

I'm assuming that we have all electrical gauges so wiring wont be too much of a pain. If I can find the correct wires.


Any info on doing this will be appreciated.
 

·
Say lowered d
Joined
·
1,349 Posts
hey lwrds10, how are ya comin on the gauges? I was gonna do the same thing in mine with ultra lites, but wanted to use a 5 speedo.:burnout:
 

·
Aviation Ordnanceman
Joined
·
201 Posts
Discussion Starter #3
I've put it off for a while. I was only gonna do it since I didnt have a gauge cluster with a tach. I just bought one off ebay for about $40 compared to the $450+ for the Autometer gauges and install. Now I have a baby on the way so money is gonna be short. Thanks for asking though I almost forgot about it
 
1 - 3 of 3 Posts
Top