S-10 Forum banner

1 - 8 of 8 Posts

·
Registered
Joined
·
197 Posts
Discussion Starter #1
Heres the results from our 4x4 ProCharger Kit using the newly designed intercooler setup:

Posted by 1bad4.3 at SSF:

Best Time was

.447 reaction (fouled)
1.953 60 ft
9.110 1/8 et
80.28 1/8 mph
14.112 1/4 et
97.64 1/4 mph

Average runs were around 14.3

Horsepower Results - 1/4 Mile Method
Your 4 x 4 s10 weighs about 4350 pounds and can complete a 1/4 mile in about 14.11 seconds. That means that you've got about 306.05 HP at the wheels, and about 397.87 HP at the flywheel.

I copied this from race-cars.net HP calc. Kurt had his truck in our shop and his mods:

2000 S-10 X-Cab 4 X 4
4200 lbs. w/o driver weighed at certifed truck scale.
GMS MAF
ATI PROCHARGER KIT 10 PSI
Custom Intercooler
JBA Headers
SLP Y-PIPE custom modded to fit 4 X 4
Single 3" exhaust all the way back with Flowmaster muffler

I'm sure we'll see 13's from his truck this year...total sleeper truck.
 

·
Registered
Joined
·
197 Posts
Discussion Starter #3
Hey fast97s10, You won't find a listing for the 4.3L on ATI's website, this is the kit we disigned using some of their components. This kit is the same as the 4.3L Kit we sell. The only difference is the intercooler and the routing of tubes. I've actually been working on making the 4x4 kit better for this customer, by using a different custom intercooler. As soon as I have it redone, I'll be able to sell the kit to everyone. It's racing season and I am extremely busy, but hopefully I will have it done within a month to 6 weeks. So watch our website www.machperformance.com for any updates as well as posting on these sites.



Thanks,
Bill Mach
 

·
RaCeR X
Joined
·
120 Posts
what is the difference between the regular kit and the race version kit for the 4.3L?performance wise and street legal?
 

·
ZQ8 2001
Joined
·
901 Posts
race kit uses the F1-SC (huge f*cking blower). only recommended for engines that are pushing 300 - 500 hp n/a

it also has a flowrate of 1525 cfm compared to 1200 on the P1-SC.
 

·
Registered
Joined
·
56 Posts
DoubleDown said:
race kit uses the F1-SC (huge f*cking blower). only recommended for engines that are pushing 300 - 500 hp n/a

it also has a flowrate of 1525 cfm compared to 1200 on the P1-SC.
There is the F1 and also the F1-R :hitit: The F1-R is for motors making 450 hp n/a


<----- F1 member
 

·
RaCeR X
Joined
·
120 Posts
hey is machperformance ever going to update there website it hasnt been updated since febuary and they dont return any emails?
 

·
ZQ8 2001
Joined
·
901 Posts
call the shop. they stopped accepting emails because they started receiving many messages which contained viruses. the number should be on the main page.
 
1 - 8 of 8 Posts
Top