[BagNDragS10]

OK....this week i am puttin a 2nd MAC valve on my truck so i can have individual front on my truck. My question is: if i am jacked up all the way in the front, and i dump (deflate) one of my front bags,,,how much lean will i get (side to side look) even tho i do not have bags on the rear. My rear is dropped with 4" Blocks thats it. I was wondering if i will have some serious lean, cause that would be good.

Im just want to know if I drop ine while cruisin will it look like im kicking side action or will it barely lean at all?

Does anyone understand what im sayiin?

If you can help lemme know thanx.:bh:

 

[hipoblaze]

YES it wil show quite a bit fo side to side action, i dorve around for a weekend with fortn bags and mono leafed rear witha 3" blcok and dead air shocks and i could hit a pretty hard side but jsut for your info if you want to hit a MEAN side you gotta lose the sway bar...



joshey

 

[Brayden]

yes you will get a nice side action happinging
but you will have to lose the sway bar. and as a suggustion i wouldnt use 4 inch blocks
or 3 inch blocks only use a 3 inch if it is an angled block or you will **** up your drive pinion.:lnv:

 

[BagNDragS10]

im plannign on ditching the sway bar,,,and ive had 4" blocks forever,,,nto probelms yet.

What do you mean,,,whatis a drive pinion? i feel stupid now