I was originally going to go with an air over leaf monoleaf setup, but everyone is saying that monoleaf is not good on a daily driver. What are the disadvantages to just leaving stock leaf springs on with air setup? I don't want to spend the money on a four link, but if I do how much? How much for a 2 or 3 link? I will probably do air over leaf due to cost, but if an air over leaf is not good to have on a daily driver then I may have to go with a different setup.
air over leaf bag kit
1 - 17 of 17 Posts
Joined
·
2,617 Posts
Running a mono leaf is bad becuase it is weak, and the leaf could snap. Talk to one of the dealers about a 2,3,4 link setup like [email protected]
Joined
·
2,186 Posts
dude, mono leafs are very unsafe. there is a bad ass triangulated 4 link from FBI, raw steel is 239 powder coated is 269 and chrome plated is 299. check it out. www.fbimini.com
Joined
·
2,617 Posts
a true mini trucker would say **** it and risk snapping a leaf until u get money for a 2,3,4 link :headbang:
Joined
·
614 Posts
i agree with intense.ive got the monoleaf and mine is a daily driver.i did mine like that till i drag thru my leaf hangers then im gonna change it.
mighty mouse remeber t oemail me before youe get that 4 link from FBi cause il lget it for you for MY price.
mighty mouse remeber t oemail me before youe get that 4 link from FBi cause il lget it for you for MY price.
I'm running a mono leaf setup on my Blazer X. (Actually mono leaf and the small helper spring) No problems yet. It rides pretty smooth. I've got a 2 door Blazer X and I'm pretty much screwed unless I want to cut the floor so 4 right now mono leaf it is.
Joined
·
1,687 Posts
that's the setup i'll be running...main/overload spring, blocks and the slam-air kit. I'll notch it, and hopfully have a decent 2- or 4-link by the end of the summer...but the mono is the only way for me to go for now...since nobody makes a nice bolt-in link setup for blazers:bash:
Joined
·
5,036 Posts
heck...on my 86 I just have a 4" angled block and the top leaf and the overload leaf left in the pack...no bags either...I've been running the piss out if for the last couple weeks..and last weekend I hit the juice for the first time...so I think if that setup works with V8 on Juice then it should work just fine for you bagged guys.
How ever I know guys that have gotten reall bad axle wrap from it..but I havent' noticed it yet in my truck.
I know that www.silverstarcustoms.com sells a tri-angluar 4 link for $250, and that is what I thought about getting for myself.
Oh..and I have a friend with a 4cyl truck that has had mono leaf'd for over a year now and no problems..
How ever I know guys that have gotten reall bad axle wrap from it..but I havent' noticed it yet in my truck.
I know that www.silverstarcustoms.com sells a tri-angluar 4 link for $250, and that is what I thought about getting for myself.
Oh..and I have a friend with a 4cyl truck that has had mono leaf'd for over a year now and no problems..
Joined
·
2,617 Posts
my s10 gets lots of f*cking wheel hop every now and then, not all the time, but when i do its baaad. ive got the longest and shortest leaves in there now, im puttin in the straight leaf and taking out the short one once i get spindles for up front
Joined
·
614 Posts
it gets the job done till your ready to do a link of somekind.
the chicks panties get wet when they see me lay out.
the chicks panties get wet when they see me lay out.
Joined
·
56 Posts
Hehe same here ! :thumbup:FLOWMINI98 said:
Joined
·
2,186 Posts
DAMN IT I NEED BAGS
Joined
·
2,617 Posts
lol i dropped my new truck this weekend, the back has 3" blocks and running one leaf, it lays on the bump stop brackets til i cut them off tuesday lol it hits ****ing hard and loud
Joined
·
614 Posts
low huh......i know what you mean for realz......i lay out and tuck 17" without a body drop wait till i come back with the 4" bodydrop tuckin lugs on 17s then theyll blow there wad
1 - 17 of 17 Posts
Join the discussion
Join now to ask and comment!