S-10 Forum banner

95 S10 single cab LS Swap NV3500 5 Speed

782 Views 11 Replies 8 Participants Last post by  ScottyV1966
So I'm doing the LS swap, it's a 95 S10 with a 2.2l 5speed.. I know the transmission won't work I have in it now.. my question is what nv3500 would I need to keep the stock shifter location? I know there are 2 different shifter locations one more in the center of the transmission and the other more on the tail of the transmission on the NV3500S.. please help can't find much of anything on the topic of shifter location other than that the 95-97 were on the tail and 98-UP is in the center.. my nv1500 looks to be more in the center that's in it right now and it's a 95.. so would I need the newer model NV3500 or still run a 95-97 one??
1 - 2 of 12 Posts
You need the 95-97 tranny unless you want to cut a new hole and have bucket seats. It also has to be out of an S10. Full size shifter location is different. I don't remember what the difference is, but they're not the same. Plus the fullsize has a really low 1st gear that would be next to useless in an LS powered S10.
Now there's the man who should write the sticky. MBP knows this stuff better than anyone else on here.
1 - 2 of 12 Posts