S-10 Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
1,635 Posts
Discussion Starter #1
I have several console trim panels from a Jimmy with the Tow/Haul button in both Light Gray & Charcoal.

For $50 + Shipping I'll include the panel, switch, 12" of wire pigtail, and the rubber liners for the bin and cupholder.
For $40 + Shipping I'll sell what's above without the liners.

This will bolt/glue in place of the forward panel on the floor shift console.

All parts are clean and have no cracks in the plastic.

Shipping will be from 97217 zip code.

334639


334640


334641


334642


334643


334644
 

·
Registered
Joined
·
1,635 Posts
Discussion Starter #2
Factory Service Manual has this to say about the Tow/Haul Switch:

Tow/haul mode enables the operator to achieve enhanced shift performance when towing or hauling a load. When tow/haul mode is selected, the tow/haul switch input signal to the body control module (BCM) is momentarily toggled to zero volts. This signals the vehicle control module (VCM) to extend the length of time between upshifts and increase transmission line pressure. Cycling the tow/haul switch again disables tow/haul mode and returns the transmission to a normal shift pattern.

And for anyone's reference. The factory schematics for the switch:

334681
 

·
Registered
Joined
·
1,635 Posts
Discussion Starter #3
Sold one of the gray panels and picked up another set of liners, so I have 2 Charcoal and 1 Gray left at $50+ shipping.
 
1 - 4 of 4 Posts
Top