[phat96]

Ok maybe u can help
will 20's fit on my s10 without cutting anything I have heard many things
I know they fit in the back

my truck is stock suspension with a wingswest kit

 

[sonomagirl]

hmm... I've seen it done at a few shows around here. You might have to cut the wheelwells a bit, but not too sure. With stock suspension you might be able to get away with it. 98SSONNOS would probably know.....

 

[blues10with20s]

i have 20s on my 94 s10 and the one problem that i have is when i hit a bump my front tires hit a little, kinda messed up my tires, but it only caught the tire a little bit, maybe this will help ya out

 

[clean n low]

you should tuck fine, there will be minimal rubbing if any if your stock.

 

[XtremeDubs]

I have a 2000 Xtreme with 20's and all I did was trim the inside of the flares a little. Works Great!

 

[Psychobrick]

phat96

I feel this thread would be better answered in the Wheels, Tires & Brakes forum so I moved it over here for you, I hope this helps.

Psychobrick

 

[98 SS ON NOS]

ok this was a 97 s10 single cab
2 inch drop front spindles rear 3 inch drop with leafs
245 40 20 and 275 35 20 rear worked out fine any lower it would rub. 4.5 bs front 5.5 bs rear

another truck i did was 3 4 drop with springs and 3 inch leafs and 1 inch block 245 35 20 worked out fine and any more drop would run. 4.5 bs all around

 

[Got_20s]

I was running a 4" drop all around, with 245/35/20's. they scrubbed my inner fenders when I hit a bump. Take out the inner fender bolts above your tire, to save it getting cut up.

 

[98 SS ON NOS]

Yah like i said 3 inch drop 245 35 20 yes more than that no